Arlon DPF White Ultra Tack Arlon’s DPF is a 90 micron, satin white, high-tensile, PVC film with aggressive, permanent adhesive. Designed to stick to . The ultimate premium film for hard to stick surfaces. A durable film combined with a high tack adhesive system allows you to use one film for all your difficult. “We use Arlon DPF every day because of its durability and price point. We wrap a lot of brick walls and needed something that would hold up in heavy.
|Published (Last):||7 November 2011|
|PDF File Size:||3.2 Mb|
|ePub File Size:||5.68 Mb|
|Price:||Free* [*Free Regsitration Required]|
Non-vertical applications are not warranted for this product. The surface should be entirely dust free: Printed durability is dependent on the ink system used. This is contingent upon no rain or harsh outdoor weather conditions. Plastic These surfaces benefit from slightly roughening with sandpaper before installation or surface oxidation with flame.
Application in cold temperature environments. Remove the film in a continuous smooth motion at a shallow angle for the fastest separation. Graphics Removal Remove the film in a continuous smooth motion at a shallow angle for the fastest separation.
These surfaces benefit from slightly roughening with sandpaper before installation or surface oxidation alon flame. Where only one person is working there will be constant starting and stopping in addition to the problems of the heat being very inconsistent.
We do not recommend wrapping gasoline tanks or similar plastics exposed to like fumes. Addition of heat during removal will make the process much cleaner and faster. Rough surfaces may not carry the standard warranties.
DPF ™ Ultra Tack Technical Details | Arlon Graphics
To assure highest adhesion the graphics will benefit from a final installation pass using a soft roller and heat source in combination. The surface must be sealed with a complete coat of paint or concrete sealer and allowed to dry. Moisture cannot wick to the adhesive surface from within the matrix of the wall. The trade-off for high tack and adhesion is to expect higher visible shrinkage than normal.
For this reason, an edge seal is recommended for applications that have very rough atlon.
DPF 8000™ Ultra Tack
Special Considerations Because of the porous nature of all masonry and its general roughness, Arlon does expect water, snow or ice to seep between the film and wall and collect on the upper edges of the applied graphic. Due to the porosity of certain types of plastics i. Removal steps are much easier as the adhesive will remove more cleanly and if any adhesive remains, the surface will be cleaned of residue more easily.
PP, PEplastics exposed to gasoline from tanks will migrate through plastic and interfere with vinyl adhesion to the plastic. Where it is practical, two people on the removal make the dlf go far faster than using just one. If the surface is not sealed there must be no loose paint, grit or chalk present.
For many polyolefinic surfaces, once the oily skin of the plastic is modified bond will improve dramatically. Click here to see the WrapItRight video: The film installs best on flat surfaces when processed and applied according to Arlon recommendations.
With one person working the heating unit in front of the second person who is peeling film, the job proceeds at a uniform and consistent pace. Dust due to ablation cannot develop under the vinyl. The film should be heated to a point of softening. Concrete, Masonry, and Tile The surface should be entirely dust free: Standard warranty applies to vertical applications only.
As a result, it is best practice to not leave the printer unattended when printing to avoid headstrikes due to adhesive build up on the film edges over time. Because of the porous nature of all masonry and its general roughness, Arlon does expect water, snow or ice to seep between the film and wall and collect on the d;f edges of the applied graphic. Sealing porous surfaces creates three benefits: When printing this product be vigilant about drying the finished decal completely before laminating, top coating or installing.